YITAMOTOR® 2002-2006 Nissan Altima Front Lower Control Arm Tierod Sway Bar Ball Joint Kit
free shipping
on all orders
30 days
money back
lowest price
guarantee
safe shopping
guarantee
Product Description
In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel. The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. They are equipped with bushings and ball joints that allow the wheel hub to move up and down and side to side. Over time, the bushings and ball joints are worn down which can cause a variety of serious problems.
Fitment
- 2002 - 2006 NISSAN ALTIMA
- 2004 - 2008 NISSAN MAXIMA
Features
- OE Replacement
Designed and manufactured to directly replace OE parts for proper fit and alignment.
- Durability and Strength
Our control arms are forged from a solid piece of steel and are electrophoretic coated for unrivaled durability and strength. Greaseable parts are pre-greased requiring no additional work
- Pre-greased
YITAMOTOR lubricated the necessary parts and filled enough grease in them, requiring no additional work
- Attention
Be sure to verify vehicle compatibility using the “FITMENT” or refer to the "Product Description"
Note:
The suspension kit must be installed by professionals who need to carefully read important instructions shown in the picture. Please test in an empty area before getting back on the road.
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit:www.p65warnings.ca.gov
Specifications
| Brand | YITAMOTOR |
| Fitment Type | Direct Replacement |
| Part Type | Control Arm Bushing Kit |
| Greasable or Sealed | Greasable |
| Surface Finish | Polished, Rust Protected |
| OE Spec or Performance/Custom | OE Spec |
| Other Part Number | K620166, K620167, K90352, K90353, EV427, ES3438 |
| Warranty | 2 Year |
Package includes
| Front Lower Right Control Arm + Ball Joint | X 1 - K620166 |
| Front Lower Left Control Arm + Ball Joint | X 1 - K620167 |
| Front Left Sway Bar End Link | X 1 - K90352 |
| Front Right Sway Bar End Link | X 1 - K90353 |
| Front Inner Tie Rod Ends | X 2 - EV427 |
| Front Outer Tie Rod Ends | X 2 - ES3438 |
Easy Return
At YITAMOTOR, Your order means a lot to us, Feel free to contact us if you have any questions.
Not satisfied with it? We offer returns for products in new/unused condition within 30 days of delivery for a refund or exchange.
Returns or Exchanges items in 4 easy steps, and Appointment FedEx pickup service for you, hope you enjoy our safe and worry-free after-sales service.
Shipping
1. Item processing time
Note:
1. It may be delayed during holidays, such as Black Friday, Christmas, New Year, etc. Or under special weather conditions.
2. We will ship your item only by FEDEX, Please do not leave PO.BOX address.
Product Description
In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel. The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. They are equipped with bushings and ball joints that allow the wheel hub to move up and down and side to side. Over time, the bushings and ball joints are worn down which can cause a variety of serious problems.
Fitment
- 2002 - 2006 NISSAN ALTIMA
- 2004 - 2008 NISSAN MAXIMA
Features
- OE Replacement
Designed and manufactured to directly replace OE parts for proper fit and alignment.
- Durability and Strength
Our control arms are forged from a solid piece of steel and are electrophoretic coated for unrivaled durability and strength. Greaseable parts are pre-greased requiring no additional work
- Pre-greased
YITAMOTOR lubricated the necessary parts and filled enough grease in them, requiring no additional work
- Attention
Be sure to verify vehicle compatibility using the “FITMENT” or refer to the "Product Description"
Note:
The suspension kit must be installed by professionals who need to carefully read important instructions shown in the picture. Please test in an empty area before getting back on the road.
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit:www.p65warnings.ca.gov
Specifications
| Brand | YITAMOTOR |
| Fitment Type | Direct Replacement |
| Part Type | Control Arm Bushing Kit |
| Greasable or Sealed | Greasable |
| Surface Finish | Polished, Rust Protected |
| OE Spec or Performance/Custom | OE Spec |
| Other Part Number | K620166, K620167, K90352, K90353, EV427, ES3438 |
| Warranty | 2 Year |
Package includes
| Front Lower Right Control Arm + Ball Joint | X 1 - K620166 |
| Front Lower Left Control Arm + Ball Joint | X 1 - K620167 |
| Front Left Sway Bar End Link | X 1 - K90352 |
| Front Right Sway Bar End Link | X 1 - K90353 |
| Front Inner Tie Rod Ends | X 2 - EV427 |
| Front Outer Tie Rod Ends | X 2 - ES3438 |
Easy Return
At YITAMOTOR, Your order means a lot to us, Feel free to contact us if you have any questions.
Not satisfied with it? We offer returns for products in new/unused condition within 30 days of delivery for a refund or exchange.
Returns or Exchanges items in 4 easy steps, and Appointment FedEx pickup service for you, hope you enjoy our safe and worry-free after-sales service.
Shipping
1. Item processing time
Note:
1. It may be delayed during holidays, such as Black Friday, Christmas, New Year, etc. Or under special weather conditions.
2. We will ship your item only by FEDEX, Please do not leave PO.BOX address.
-
Visto se tarda en llegar
Hello, delivery takes 3-5 days.
-
Visto se tarda en llegar
Hello, delivery takes 3-5 days.
